Wireless Network Ip Addressing Mode Configuration - Yealink SIP-T3 Administrator's Manual

0-Disabled, the phone will enable the Wi-Fi feature and try to connect to the known wireless network
Permitted
(according to the priority) automatically. But if the phone fails to connect to any known wireless net-
Values work, the phone will still display the Wi-Fi scanning prompt when connecting to the phone.
1-Enabled
Default 1
Supported
T53, T53C, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T42U, T42S, T41S, T29G, T27G
Devices
Parameter phone_setting.wifi_security_check.enable
Description It enables or disables a pop-up prompt to confirm the unencrypted Wi-Fi connection.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920,
Devices CP925, CP935W
[1]
If you change this parameter, the phone will reboot to make the change take effect.
[2]
X is Wi-Fi ID. X=1-5.

Wireless Network IP Addressing Mode Configuration

The following table lists the parameters you can use to configure IP addressing mode for the wireless network.
Parameter static.network.wifi.ip_address_mode
Description It configures the IP addressing mode for the wireless network.
0-IPv4
Permitted
1-IPv6
Values
2-IPv4 & IPv6
Default
0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T48S, T46U, T46S, T43U, T42U, T42S, T41S, T27G, CP920,
Devices CP925, CP935W
Web UI Network > Wi-Fi > Internet Port > Mode (IPv4/IPv6)
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Wi-Fi Port > IPAddress Mode
CP925/CP935W:
Phone UI
More > Advanced (default password: admin) > Network > Wi-Fi Port > IPAddress Mode
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Wi-Fi Port > IP Mode
Parameter static.network.wifi.preference
It specifies IPv4 or IPv6 as the preferred wireless network in a Dual-Stack mode.
Description
Note: It works only if "static.network.wifi.ip_address_mode" is set to 2 (IPv4 & IPv6).
0-IPv6
Permitted
Values
1-IPv4
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Network Configurations
48