Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
"features.intercom.mode").
Permitted
0-Disabled
1-Enabled
Values
Default
0
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Call Information Display Configuration
The following table lists the parameter you can use to configure call information display.
Parameter features.blf.show_callinfo.enable
It enables or disables the phone to display the call information by long pressing the BLF/BLF List/Call
Description
Park key.
0-Disabled
1-Enabled, when the monitored line is ringing, during a call, or has a parked call, users can long
Permitted
press the BLF/BLF List/Call Park key to view the call information, and then select to pick up the incom-
Values
ing call (only for BLF/BLF List key), barge in a conference (only for BLF/BLF List key), or retrieve the
parked call.
Default
0
Supported
All phones except T48G, T46G, T42G, T41P, T30P, T30, T29G, T19(P) E2 and CP920
Devices
BLF Send DTMF Configuration
The following table lists the parameter you can use to configure BLF send DTMF.
Parameter account.X.blf_send_dtmf.enable
Description It enables or disables the phone to send DTMF to achieve BLF transfer feature.
0-Disabled
Permitted
Values
1-Enabled
Default
0
Web UI
Account > Advanced > BLF Send DTMF
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter account.X.blf_dtmf_code
It configures the transfer prefix code for sending DTMF to achieve BLF transfer.
Description
Note: It works only if "account.X.blf_send_dtmf.enable" is set to 1 (Enabled).
Permitted
String within 32 characters
Values
Default
Blank
Web UI
Account > Advanced > BLF DTMF Codec
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Case Scen- 1. Configure the following parameters:
501
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg