Ringer Device - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Parameter distinctive_ring_tones.alert_info.X.ringer
Description It configures the desired ring tone for each internal ringer text.
Integer from 1 to 15 (the digit stands for the appropriate ring tone) or ring tone name:
l
1 or Ring1.wav
2 or Ring2.wav
3 or Ring3.wav
4 or Ring4.wav
5 or Ring5.wav
6 or Ring6.wav
7 or Ring7.wav
8 or Ring8.wav
9 or Ring9.wav
10 or Ring10.wav
11 or Ring11.wav
Permitted
12 or Ring12.wav
Values
13 or Ring13.wav
14 or Silent.wav
15 or Splash.wav
For T3 phones:
1 or Ring1.wav
2 or Ring2.wav
3 or Ring3.wav
4 or Ring4.wav
5 or Silent.wav
6 or Splash.wav
Custom ring tone name (for example, Customring.wav)
l
Default
1
T57W/T54W/T53W/T53/T53C/T48U/T46U/T43U/T42U/CP925/CP935W:
Settings > Ring > Internal Ringer X
Web UI
Other Phones:
Settings > Ring > Internal Ringer File
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.
[2]
X is the ring tone ID. X=1-10.

Ringer Device

You can use either or both the speaker and the headset as the ringer devices. You can configure which ringer
device to be used when receiving an incoming call. For example, if the ringer device is set to Headset, ring tone will
be played through your headset.
If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired headset, Bluetooth headset
or USB headset) should be connected to the IP phone and the headset mode also should be activated in advance.
The USB headset is only applicable to
T57W/T54W/T53W/T53/T53C/T48U/T48S/T46U/T46S/T43U/T42S/T42U/T41S phones.
You can press the HEADSET key to activate the headset mode. For more information, refer to the
specific user guide.
181
[2]
<y0000000000xx>.cfg
[2]
> File
Yealink phone-