Outbound Proxy In Dialog; Outbound Proxy In Dialog Configuration - Yealink SIP-T3 Administrator's Manual

Values 1-Enabled
Default 0
Parameter account.X.register_expires_overlap
Description It configures the renewal time (in seconds) away from the registration lease.
Permitted
Positive integer and -1
Values
Default -1
Parameter account.X.subscribe_expires_overlap
Description It configures the renewal time (in seconds) away from the subscription lease.
Permitted
Positive integer and -1
Values
Default
-1
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.

Outbound Proxy in Dialog

An outbound proxy server can receive all initiating request messages and route them to the designated destination.
If the device is configured to use an outbound proxy server within a dialog, all SIP request messages from the
device will be sent to the outbound proxy server as a mandatory requirement.
Note
: To use this feature, make sure the outbound server has been correctly configured on the device. For more information
on how to configure the outbound server, refer to
Topic

Outbound Proxy in Dialog Configuration

Outbound Proxy in Dialog Configuration
The following table lists the parameter you can use to configure the outbound proxy in dialog.
Parameter sip.use_out_bound_in_dialog
It enables or disables the phone to send all SIP requests to the outbound proxy server mandatorily in
a dialog.
Description
Note: It works only if "account.X.outbound_proxy_enable" is set to 1 (Enabled).
0-Disabled, only the new SIP request messages from the phone will be sent to the outbound proxy
server in a dialog.
Permitted
Values
1-Enabled, all the SIP request messages from the phone will be sent to the outbound proxy server in
a dialog.
Default 0
Web UI Features > General Information > Use Outbound Proxy In Dialog
[1]
[1]
Server Redundancy
.
<y0000000000xx>.cfg
Account Settings
<MAC>.cfg
<MAC>.cfg
335