Dnd Synchronization For Server-Side Configuration - Yealink SIP-T3 Administrator's Manual

Hide thumbs Also See for SIP-T3:
Table of Contents

Advertisement

Web UI
Features > Forward& DND > DND > AccountX > On Code
Phone UI
Menu > Features > DND > AccountX > On Code
Parameter account.X.dnd.off_code
It configures the DND off code to deactivate the server-side DND feature.
The phone will send the DND off code to the server when you deactivate the DND feature on the
phone.
Description
Note: It works only if "features.dnd.allow" is set to 1 (Enabled) and "features.dnd_mode" is set to 1
(Custom).
Permitted
String within 32 characters
Values
Default
Blank
Supported
All phones except T30P, T30, T19(P) E2, CP920, CP925 and CP935W
Devices
Web UI
Features > Forward& DND > DND > AccountX > Off Code
Phone UI
Menu > Features > DND > AccountX > Off Code
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42U/T42G/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2.

DND Synchronization for Server-side Configuration

DND synchronization feature provides the capability to synchronize the status of the DND features between the IP
phone and the server.
If the DND is activated in phone mode, the DND status changing locally will be synchronized to all registered
accounts on the server; but if the DND status of a specific account is changed on the server, the DND status locally
will be changed.
The following table lists the parameters you can use to configure DND synchronization for server-side.
Parameter features.feature_key_sync.enable
Description It enables or disables to synchronize the feature status between the IP phone and the server.
0-Disabled
Permitted
Values
1-Enabled, the phone sends a SUBSCRIBE message with event "as-feature-event".
Default
0
Parameter account.X.feature_key_sync.enable
It enables or disables to synchronize the feature status between the IP phone and the server for
account X.
Description
Note: The value configured by this parameter takes precedence over that configured by the parameter
"features.feature_key_sync.enable".
0-Disabled
Permitted
Values
1-Enabled, the phone to send a SUBSCRIBE message with event "as-feature-event".
Default
0
Supported All phones except T48G, T46G, T42G, T41P, T29G, CP920, CP925 and CP935W
[1]
[1]
Call Features
<MAC>.cfg
<y0000000000xx>.cfg
<MAC>.cfg
435

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sip-t2Sip-t4Sip-t5Sip-cp920

Table of Contents