Example: Placing A Call Via Web User Interface - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Procedure
1. Enter request URI (for example, http://10.2.20.252/screencapture) in the browser's address bar and press the
Enter key on the keyboard.
2. Do one of the following:
If it is the first time you capture the phone's current screen using the computer, the browser will display
l
"Remote control forbidden", and the phone screen will prompt the message "Allow remote control?".
Press OK on the phone to allow remote control. The phone will return to the previous screen.
Refresh the web page.
The browser will display an image of the phone's current screen. You can save the image to your local sys-
tem.
Else, the browser will display an image of the phone's current screen directly. You can save the image to
l
your local system.
Note : Frequent capture may affect phone performance. Yealink recommends you to capture the phone screen display within
a minimum interval of 4 seconds.

Example: Placing a Call via Web User Interface

Procedure
1. Go to Directory > Phone Call Info.
2. Select the desired account from the Outgoing Identity drop-down menu.
3. Enter the callee's number in the Dial Number field.
533