Logon Wizard; Logon Wizard Configuration - Yealink SIP-T3 Administrator's Manual

use the DNS address obtained by DHCP.
2-The DNS list is composed of dynamic DNS + static DNS. Use the DNS obtained by DHCP first, and
then use the static DNS when the dynamic DNS is invalid.
Default 0
Parameter static.network.wifi.dns_list.mode
Description It configures the DNS query mode in the wireless network.
0-If static DNS is configured, use static DNS. If not, use dynamic DNS obtained by DHCP.
1-The DNS list consists of static DNS and dynamic DNS. Use static DNS preferentially. When static
Permitted
DNS is invalid, use the DNS obtained by DHCP.
Values
2-The DNS list consists of dynamic DNS and static DNS. Use the DNS obtained by DHCP pref-
erentially, and then use the static DNS when the dynamic DNS is invalid.
Default 0
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.
[2]
X is the record ID. X=1-12.

Logon Wizard

Logon wizard allows the phones to provide the logon wizard during the first startup. It works only if there is no
registered account on the IP phone.
It is not applicable to CP920 phones.
Topic

Logon Wizard Configuration

Logon Wizard Configuration
The following table lists the parameters you can use to configure the logon wizard.
Parameter phone_setting.logon_wizard
It enables or disables the phone to provide the logon wizard after startup when there is no registered
Description
account.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Supported
All phones except CP920
Devices
Web UI Features > General Information > Logon Wizard
Parameter hotdesking.startup_register_name_enable
It enables or disables the phone to provide an input field of register name on the logon wizard after
startup when there is no registered account.
Description
Note: It works only if "phone_setting.logon_wizard" is set to 1 (Enabled).
Permitted
0-Disabled
1-Enabled
Values
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Account Settings
347