Shared Line; State Indicator Of Shared Line - Yealink SIP-T3 Administrator's Manual

account.1.blf_send_dtmf.enable = 1
account.1.blf_dtmf_code = *55
transfer.dsskey_deal_type = 2
ario
2. Set line key 5 as a BLF key, and the monitored number is A (3333).
Result: When the phone establish a call with B and then you press the BLF key, it will send the DTMF
sequence *553333.
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.

Shared Line

Yealink phones support Shared Call Appearance (SCA) and Bridged Line Appearance (BLA) to share a line.
Shared call appearances and bridged line appearances are similar signaling methods that enable more than one
phone to share the same line or registration. The methods you use vary with the SIP server you are using.
The shared line users have the ability to do the following:
Place and answer calls
l
Place a call on hold
l
Retrieve a held call remotely
l
Barge in an active call (only SCA)
l
Pull a shared call (only SCA)
l
Topics

State Indicator of Shared Line

Shared Call Appearance (SCA) Configuration
Bridge Lines Appearance (BLA)
State Indicator of Shared Line
The shared line is indicated by different line key icon. Line key icon is not available on the T30P/T30/T19(P) E2
phones.
The following table shows the LED/icons indicator associated with the shared line:
CP925/CP935W Icon
(Monitoring SCA Phone)
(Flashing)
(Flashing)
(Local SCA Phone)
The shared line is idle.
The shared line is seized.
The shared line receives an incoming call.
The shared line is dialing.
The shared line is busy or is in a call.
The call on the shared line is placed on public hold.
The call on the shared line is placed on private hold.
Description
Advanced Features
502