Internet Port And Pc Port; Supported Transmission Methods; Internet Port And Pc Port Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Default 5061
Web UI Settings > SIP > TLS SIP Port

Internet Port and PC Port

Yealink phones support two Ethernet ports: Internet port and PC port. You can enable or disable the PC port on the
phones. The CP920/CP925 phones have Internet port only.
Topics

Supported Transmission Methods

Internet Port and PC Port Configuration

Supported Transmission Methods
Three optional methods of transmission configuration for the IP phone Internet port and PC port:
Auto-negotiate
l
Half-duplex (transmit in 10Mbps or 100Mbps)
l
Full-duplex (transmit in 10Mbps, 100Mbps or 1000Mbps (1000Mbps is only applicable to
l
T57W/T54W/T53W/T53/T53C/T48U/T48S/T48G/T46U/T46S/T46G/T43U/T42U/T42G/T42S/T40G/T33G/T31G/T2-
9G/T27G/T23G phones))
Auto-negotiate is configured for both Internet and PC ports on the IP phone by default.
Internet Port and PC Port Configuration
The following table lists the parameters you can use to configure the Internet port and PC port.
Para-
static.network.pc_port.enable
meter
Descrip-
It enables or disables the PC port.
tion
Per-
0-Disabled
mitted
1-Auto Negotiation
Values
Default 1
Sup-
ported All phones except CP920/CP925
Devices
Web UI Network > PC Port > PC Port Active
Para-
static.network.internet_port.speed_duplex
meter
It configures the network speed over Ethernet of the Internet port.
Note: For
Descrip-
T57W/T54W/T53W/T53/T53C/T48U/T48S/T48G/T46U/T46S/T46G/T43U/T42U/T42G/T42S/T40G/T33G/T-
tion
31G/T29G/T27G/T23G phones, you can set the transmission speed to 1000Mbps/Auto Negotiation to
transmit in 1000Mbps if the phone is connected to the switch supports Gigabit Ethernet. We recommend
that you do not change this parameter.
0-Auto Negotiation
Per-
1-Full Duplex 10Mbps
mitted
2-Full Duplex 100Mbps
Values
3-Half Duplex 10Mbps
63
<y0000000000xx>.cfg
<y0000000000xx>.cfg