Analog Headset Mode; Analog Headset Mode Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Values 1-Enabled
Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T33P, T33G,
T31P, T31G, T31, T30P, T30, T27G, CP920, CP925, CP935W
Devices
Parameter features.out_of_service_alert_time
It configures the time (in seconds) to wait before the phone plays an alert tone after the network is
abnormal.
Description
Note: It works only if "features.out_of_service_alert.enable" is set to 1 (Enabled).
Permitted
Integer from 0 to 3600
Values
Default 60
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T33P, T33G,
T31P, T31G, T31, T30P, T30, T27G, CP920, CP925, CP935W
Devices

Analog Headset Mode

You can manually configure audio solutions for Yealink RJ headsets.
Topic

Analog Headset Mode Configuration

Analog Headset Mode Configuration
The following table lists the parameters you can use to configure analog headset mode.
Parameter features.analog_headset.mode
Description It sets the audio parameter mode of the analog headset.
Permitted
Common, YHS36, YHS34, YHS33
Values
Default
Common
Supported
All phones except CP920/CP925/CP935W
Devices
Web UI Settings > Voice > Analog Headset Mode
Color Screen Phones:
Menu > Basic > Analog Headset Mode
Phone UI
Black-and-white Screen Phones:
Menu >Settings > Basic Settings > Analog Headset Mode
326
<y0000000000xx>.cfg
<y0000000000xx>.cfg