Registration Settings Configuration - Yealink SIP-T3 Administrator's Manual

Registration Settings Configuration

The following table lists the parameters you can use to change the registration settings.
Parameter account.X.enable_user_equal_phone
Description It enables or disables the phone to add "user=phone" to the SIP header of the INVITE message.
Permitted
0-Disabled
Values 1-Enabled
Default 0
Web UI Account > Advanced > Send user=phone
Parameter account.X.register_mac
Description It enables or disables the phone to add MAC address to the SIP header of the REGISTER message.
Permitted
0-Disabled
Values 1-Enabled
Default 0
Web UI Account > Advanced > SIP Send MAC
Parameter account.X.register_line
It enables or disables the phone to add a line number to the SIP header of the REGISTER message.
For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G: 0~15 stand for line1~line16;
For T53W/T53/T53C/T43U/T42U/T42S/T42G: 0~11 stand for line1~line12;
For T41P/T41S/T27G: 0~5 stand for line1~line6;
Description
For T33P/T33G: 0~3 stand for line1~line4;
For T40P/T40G/T23P/T23G: 0~2 stand for line1~line3;
For T31P/T31G/T31/T21(P) E2: 0~1 stand for line1~line2;
For T30P/T30/T19(P) E2/CP920/CP925/CP935W: 0 stands for line1.
Permitted 0-Disabled
1-Enabled
Values
Default
0
Web UI Account > Advanced > SIP Send Line
Parameter account.X.contact_take_line_param
It enables or disables the phone to carry the line parameter in the Contact header of the Register mes-
Description
sage.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter account.X.unregister_on_reboot
Description It enables or disables the phone to unregister first before re-registering account X after a reboot.
Permitted 0-Disabled
1-Enabled
Values
[1]
[1]
[1]
[1]
[1]
Account Settings
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
<MAC>.cfg
333