Handset Network Directory; Shared Directory; Shared Directory Configuration - Yealink SIP-T3 Administrator's Manual

Default 0
[1]X is the handset ID. X=1-5.

Handset Network Directory

Parameter bw.xsi.directory.multiple_accounts.enable
It configures the handset to display BSFT network directory on the screen.
Description
Note: It works only if "bw.xsi.directory.enable" is set to 1 (Enabled).
0-All handsets display network directory of account 1.
Permitted
2-The handset displays the personal directory (configured individually) and the other network dir-
Values
ectory of account 1.
Default 0

Shared Directory

Users can manage and call the contacts in the Shared Directory on the phone and all the registered handsets.
The shared directory can store up to 1000 contacts.
It is not applicable to DD phones.
Topics

Shared Directory Configuration

Shared Contact File Customization
Shared Directory Configuration
The following table lists the parameters you can use to configure the shared directory.
Parameter static.directory_setting.shared_contact.enable
Description It enables or disables the Shared Directory feature.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Supported
All handsets except DD phones
Devices
Parameter shared_contact_list.url
It configures the access URL of the shared contact file (*.xml) of the phone and registered handsets.
Example:
Description
shared_contact_list.url = http://192.168.10.25/contact.xml
Note: It works only if "static.directory_setting.shared_contact.enable" is set to 1 (Enabled).
Permitted
URL within 511 characters
Values
Default
Blank
Supported
All handsets except DD phones
Devices
Using DECT Handsets with T57W/T54W/T53W/T53/T53C Phones
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
150