Example: Set A Park/Retrieve Key For Transfer Call Park Mode; Example: Setting A Line Key As Directed Pickup Key - Yealink SIP-T3 Administrator's Manual

linekey.3.value =4603
linekey.3.label =Retrieve Bill
After provisioning, you can easily press the Park key (line key 1) to park a call to a specific extension (4603) during
a call, and press the Retrieve key (line key 3) to retrieve the parked call from the specific extension (4603) when the
phone is idle.
If the "linekey.1.value" is set to blank, the park key will perform as the Park soft key.
Note : In FAC call park mode, the Park/Retrieve key invokes the call park code/park retrieve code by default. Therefore, the
phone dials out *684603 to park a call, and dials out *884603 to retrieve a call. If these codes are not set, you can assign code
and extension to "linekey.X.value", for example, "*684603".

Example: Set a Park/Retrieve Key for Transfer Call Park Mode

Scenario Conditions
features.call_park.park_mode = 2
features.call_park.line_restriction.enable = 1
Example
######Set a Park key######
linekey.1.type = 10
linekey.1.value =*01
linekey.1.line = 1
linekey.1.label =Bill
######Set a Retrieve key####
linekey.3.type = 56
linekey.3.line = 1
linekey.3.value =*11
linekey.3.label =Retrieve Bill
After provisioning, you can easily press the Park key (line key 1) to park a call to the specific shared parking lot
(*01) during a call, and press the Retrieve key (line key 3) to retrieve the parked call from the shared parking lot
(*01) using the retrieve code (*11). You can only perform call park feature on the specific line (line 1).
If the "features.call_park.line_restriction.enable" is set to 0 (Disabled), the phone will park/retrieve the call to the
server on the current line in use.
Note
: In Transfer call park mode, if you press the Park key when the phone is idle, the Park key will invoke the call park
code. Therefore, you can use a Park key to park and retrieve a call. In this case, you need to assign the park retrieve code
(*11) to "features.call_park.park_code". When you press the Park key again on the idle screen, the phone will dial out "*11*01"
to retrieve the parked call.

Example: Setting a Line Key as Directed Pickup Key

Scenario Conditions
account.1.direct_pickup_code = *97
or
features.pickup.direct_pickup_code = *97
Example
Related Topic
Call Park and Retrieve
Related Topic
Directed Call Pickup
Phone Customization
293