For T57W/T48U/T48S/T48G phones, the BLF/BLF List DSS key field displays a green icon for 1000ms
and then turns to white.
For other phones, the BLF/BLF list DSS key LED glows green for 1000ms and then goes out.
Note: It works only if "blf.enhanced.callout.enable" is set to 1 (Enabled).
Permitted
String
Values
Default
Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter blf.enhanced.callout.callin.action
It configures the behavior when pressing the BLF/BLF list DSS key if the monitor is ringing and mon-
itored user is calling out.
Description
Note: It works only if "blf.enhanced.callout.enable" is set to 1 (Enabled).
Permitted
String
Values
Default
Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter blf.enhanced.callout.talking.action
It configures the behavior when pressing the BLF/BLF list DSS key if the monitor is talking and mon-
itored user is calling out.
Description
Note: It works only if "blf.enhanced.callout.enable" is set to 1 (Enabled).
Permitted
String
Values
Default
Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter blf.enhanced.callout.idle.action
It configures the behavior when pressing the BLF/BLF list DSS key if the monitor is idle and monitored
user is calling out.
Description
Note: It works only if "blf.enhanced.callout.enable" is set to 1 (Enabled).
Permitted
String
Values
Default
Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
BLF Key LED/Icon and Behavior for Talking State Configuration
The following table lists the parameters you can use to configure BLF key LED/icon and Behavior for talking state
(the monitored user is talking).
Parameter blf.enhanced.talking.enable
Description It enables or disables the custom configuration when the monitored user is talking.
Permitted
0-Disabled
Values
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Advanced Features
496