Yealink SIP-T3 Administrator's Manual page 548

Parameter hotdesking.dsskey_outbound_enable
It enables or disables the phone to provide an input field of the outbound server on the hot desking
Description
login wizard when pressing the Hot Desking DSS key.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Supported
All phones except CP920
Devices
Parameter features.hotdesking_clear_calllog.enable
It enables or disables the phone to clear call records of the last guest after using hot desking to log
Description
into a new account.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Supported
T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter hotdesking.log_out_prompt.time
It configures the time (minutes) of the pop-up prompt for logging out of the account to appear on the
LCD screen when there is no operation on the registered phone.
Description
Note: When the parameter is set to 0, it means the pop-up prompt for logging out of the account does
not appear on the LCD screen.
Permitted
Integer from 0 to 1440
Values
Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter hotdesking.log_out_prompt.duration
It configures the countdown pop-up prompt (seconds) displayed on the LCD screen to log out of the
account.
Description
Note: It works only if "hotdesking.log_out_prompt.time" is not set to 0.
Integer from -1 to 86400
Permitted
-1-Log out of the account without countdown pop-up prompt.
Values
0-Do not log out of the account.
Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter hotdesking.clear_specified_account
It configures to clear the specified account information when pressing the Hot Desking DSS key.
Multiple accounts are separated by commas.
Description
Example:
hotdesking.clear_specified_account=1,2,3
Permitted
0-All accounts will be cleared.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Advanced Features
542