Yealink SIP-T3 Administrator's Manual page 407

dialplan.digitmap.interdigit_short_timer = 5
When you enter 1, it matches part of two-digit maps, the phone tries to wait 10 seconds and then dials
out 1 if no numbers entered;
When you enter 15, it also matches part of two-digit maps, the phone tries to wait 10 seconds and
then dials out 15 if no numbers entered;
When you enter 153, it also matches part of two-digit maps, the phone tries to wait 10 seconds. But
after waiting for 5 seconds, it completely matches the first digit map and then immediately dials out
153.
Note: It works only if "dialplan.digitmap.enable" or "account.X.dialplan.digitmap.enable" is set to 1
(Enabled). The value configured by the parameter "account.X.dialplan.digitmap.interdigit_long_timer"
takes precedence over that configured by this parameter.
Permitted
Integer from 0 to 255
Values
Default 10
Parameter dialplan.digitmap.interdigit_short_timer
It configures the timeout interval (in seconds) for any string of digit map.
The phone will wait this many seconds before matching the entered digits to the dial plan and placing
the call.
Description
Note: It works only if "dialplan.digitmap.enable" or "account.X.dialplan.digitmap.enable" is set to 1
(Enabled). The value configured by the parameter "account.X.dialplan.digitmap.interdigit_short_timer"
takes precedence over that configured by this parameter.
Single configuration (configure a specific value for the timer letter "T" for all strings with "T" of the digit
map)
Example:
dialplan.digitmap.interdigit_short_timer = 5
If "dialplan.digitmap.string" is set to <[2-9]x:86>3.T|0T, the phone will wait 5 seconds before matching
the entered digits to this dial plan and placing the call.
Distribution configuration (configure a string of positive integers separated by "|" for each string of
Permitted
the digit map in the corresponding position)
Values
If there are more digit maps than timeout values, the last timeout is applied to the extra digit map. If
there are more timeout values than digit maps, the extra timeout values are ignored.
Example:
dialplan.digitmap.interdigit_short_timer = 4|5|3|6|2|1
If "dialplan.digitmap.string" is set to <[2-9]x:86>3.T|2T|1xxT|0x.!|[2-9]11T, 4 is applied to the "<[2-
9]x:86>3.T" digit map, 5 is applied to "2T" digit map, 3 is applied to "1xxT" digit map, 6 is applied to
"0x.!" digit map, 2 is applied to the "[2-9]11T" digit map, the last digit 1 is ignored.
Default 3
Parameter dialplan.digitmap.no_match_action
It configures the behavior when an impossible digit map match occurs.
Note: It works only if "dialplan.digitmap.enable" or "account.X.dialplan.digitmap.enable" is set to 1
Description
(Enabled). The value configured by the parameter "account.X.dialplan.digitmap.no_match_action"
takes precedence over that configured by this parameter.
0-prevent users from entering a number and immediately dial out the entered numbers
Permitted
Values
1-the dialing will fail and the phone screen will prompt "Forbidden Number"
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Call Features
401