Handset Wallpaper; Handset Wallpaper Configuration - Yealink SIP-T3 Administrator's Manual

Parameter custom.handset.keypad_light.enable
It enables or disables the handset to turn on the keypad light (digital key, # key, * key, TRAN key, and
Mute key) when any key is pressed.
Description
Note: It will take effect on all handsets that are registered to the same phone. It works only if "stat-
ic.auto_provision.handset_configured.enable" is set to 1 (Enabled).
-1-Do not modify the configuration.
Permitted
0-Disabled
Values
1-Enabled
Default -1
Supported
W78H, W73H, W59R, W53H, W56H
Devices
Handset UI OK > Settings > Display > Keypad LED

Handset Wallpaper

Wallpaper is an image used as the background for the handset idle screen. Users can select an image from hand-
set's built-in background.
Topic

Handset Wallpaper Configuration

Handset Wallpaper Configuration
The following table lists the parameter you can use to configure the handset wallpaper.
Parameter custom.handset.wallpaper
It configures the wallpaper displayed on the handset LCD screen.
Description
Note: It will take effect on all handsets that are registered on the same phone. It works only if "stat-
ic.auto_provision.handset_configured.enable" is set to 1 (Enabled).
1-Wallpaper1
2-Wallpaper2
Permitted
3-Wallpaper3
Values
4-Wallpaper4
5-Wallpaper5
Default
-1, do not change the wallpaper set on each handset.
Supported
W78H, W73H, W59R, W53H, W56H
Devices
W78H/W73H/W59R/W53H/W56H:
OK > Settings > Display > Wallpaper
Handset UI
CP935W:
More > Basic > Display > Wallpaper
Using DECT Handsets with T57W/T54W/T53W/T53/T53C Phones
<y0000000000xx>.cfg
<y0000000000xx>.cfg
138