Dhcp Option For Ipv6; Supported Dhcp Option For Ipv6; Dhcp Option 59 And Custom Option; Vlan - Yealink SIP-T3 Administrator's Manual
Hide thumbs
Also See for SIP-T3:
- Auto provisioning manual (155 pages) ,
- Administrator's manual (578 pages)
Table of Contents
Advertisement
Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
DHCP Option for IPv6
The phone can obtain IPv6-related parameters in an IPv6 network via DHCP option.
Topics
Supported DHCP Option for IPv6
DHCP Option 59 and Custom Option
Supported DHCP Option for IPv6
The following table lists common DHCP options for IPv6 supported by Yealink phones.
Parameters
DHCPv6 Option
ACS URL
DNS Server
DNS Domain
Search List
SNTP Server
Information
Refresh Time
Boot File URL
DHCP Option 59 and Custom Option
During the startup, the phone automatically detects the DHCP option for obtaining the provisioning server address.
The priority is as follows: custom option > option 59.
Related Topic
DHCP Provision Configuration
VLAN
The purpose of VLAN configurations on the phone is to insert a tag with VLAN information to the packets generated
by the phone. When VLAN is properly configured for the ports (Internet port and PC port) on the phone, the phone
will tag all packets from these ports with the VLAN ID. The switch receives and forwards the tagged packets to the
corresponding VLAN according to the VLAN ID in the tag as described in IEEE Std 802.3.
In addition to manual configuration, the phone also supports the automatic discovery of VLAN via LLDP, CDP or
DHCP. The assignment takes effect in this order: assignment via LLDP/CDP, manual configuration, then assign-
ment via DHCP.
For more information on VLAN, refer to
Topics
LLDP Configuration
CDP Configuration
Manual VLAN Configuration
DHCP VLAN Configuration
VLAN Change Configuration
LLDP Configuration
LLDP (Linker Layer Discovery Protocol) is a vendor-neutral Link Layer protocol, which allows the phones to advert-
ise its identity and capabilities on the local network.
37
17
Specify the access URL of the TR-069 ACS server.
23
Specify a list of DNS servers available to the client.
24
Specify a domain search list to a client.
Specify a list of Simple Network Time Protocol (SNTP) servers available to the
31
client.
Specify an upper bound for how long a client should wait before refreshing
32
information retrieved from DHCPv6.
59
Specify a URL for the boot file to be downloaded by the client.
VLAN Feature on Yealink IP
Description
Phones.
Advertisement
Table of Contents
Troubleshooting
