Label Alignment For Line/Ext Key Display; Label Alignment Display Configuration; Page Switch Key - Yealink SIP-T3 Administrator's Manual

Default 0
Supported
T54W, T46U, T46S, T46G, T29G
Devices

Label Alignment for Line/Ext Key Display

You can customize the line/Ext key label alignment.
This feature is only applicable to T54W/T53C/T46U/T46S/T46G/T33P/T33G/T29G phones and expansion module
EXP50 (connected to the T57W/T54W/T53W/T53/T53C phones)/EXP43 (connected to the T48U/T46U/T43U
phones).
The following figures show the line key label alignment on T46S/G phones:
Topic

Label Alignment Display Configuration

Label Alignment Display Configuration
The following table lists the parameter you can use to configure the label alignment display.
Parameter phone_setting.dsskey_label.display_method
It configures the alignment mode of the line key/Ext key label.
Description
Note: If some Ext keys already exist before configuration, you need to refresh the page (press the
page keys, or try re-connecting the expansion module) to make the change take effect.
0-the label and icon align left
Permitted
1-when the line key/Ext key is on the left side of the screen, the label and icon align left; when the line
Values
key/Ext key is on the right side of the screen, the label and icon align right
Default 0
Supported
T54W, T53C, T46U, T46S, T46G, T33P, T33G, T29G, EXP50 connected to the
T57W/T54W/T53W/T53/T53C phones, and EXP43 connected to the T48U/T46U/T43U phones
Devices

Page Switch Key

By default, the page switch key is available only if a line key not located on the first page is assigned functionality. If
you want to configure line keys on more pages from the idle screen quickly, you can configure the line key in the
right bottom to be a page switch key.
It is only applicable to
T54W/T53W/T53/T53C/T46U/T46S/T46G/T43U/T42U/T42S/T42G/T41P/T41S/T33P/T33G/T29G/T27G phones.
Topic
Page Switch Key Configuration
<y0000000000xx>.cfg
Phone Customization
241