Yealink SIP-T3 Administrator's Manual page 305

102-PSTN2
Note: features.fwd_mode = 1 & programablekey.X.type =2 & programablekey.X.line =0: it means for-
ward will apply to all lines on the phone; programablekey.X.type = 13 & programablekey.X.line =0: it
means the phone can automatically switch accounts for speed dial; programablekey.X.type = 14 & pro-
gramablekey.X.line =0: it means the phone can automatically switch accounts for intercom.
Default 1
Supported
All phones except T30P/T30/T19(P) E2/CP925/CP935W
Devices
Web UI Dsskey > Programmable Key > Line
Parameter programablekey.X.value
It configures the value for some programmable key features.
For example, when you assign the Speed Dial to the programmable key, this parameter is used to spe-
Description
cify the contact number you want to dial out. It is also used to specify the contact number with the
DTMF sequence. The contact number and DTMF sequence are separated by commas.
Permitted
String within 99 characters
Values
Default Blank
Web UI Dsskey > Programmable Key > Value
programablekey.X.label
Parameter
(X=1-4)
It configures the label displayed on the phone screen for a specific programmable key.
Description
This is an optional configuration.
Permitted
String within 99 characters
Values
Default Blank
Web UI Dsskey > Programmable Key > Label
Parameter programablekey.X.extension
For multicast paging:
It configures the channel of the multicast paging group.
Description For intercom feature:
It configures the pickup code.
Note: It is only applicable when "programablekey.X.type" is set to 13, 14 or 24.
For multicast paging:
0 to 31
Permitted
Values
For intercom feature:
String within 256 characters
Default 0
Supported
All phones except CP925/CP935W
Devices
Web UI
Dsskey > Programmable Key > Extension
Parameter programablekey.X.xml_phonebook
[1]
[1]
[1]
[1]
Phone Customization
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
299