Zoom Call Settings - Yealink SIP-T3 Administrator's Manual

1-The phone displays the identity contained in the Remote field of the NOTIFY message when the
phone monitored the call queue.
Default Blank
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
The feature access code is *32. A (your phone) monitors queue B (number: 8866), B and party C is
during the call.
Set the following:
sip.blf_post_body.enable = 1
Case Scen-
blf.takeover_barge_in_code = *32
ario
features.blf.show_callinfo.enable = 1
During the call of the monitored line, long press the BLF key and you press the Barge In soft key of
active call one, then the phone calls *32886600 to barge in the call. If you press the Barge In soft key
of active call two, then the phone calls *32886601 to barge in the call.
Related
features.blf.show_callinfo.enable
Parameters

Zoom Call Settings

Parameter account.X.external_intercom.whisper_barge_in
It enables or disables the phone to answer an intercom call in the way of whisper barge in, which
means you can hear call participants but your audio can only be transmitted to the user you are mon-
Description
itoring.
Note: It works only if "features.intercom.allow" and "call_waiting.enable" are set to 1 (Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter account.X.external_intercom.ignore_dnd.mode
Description It enables or disables the phone to answer the intercom call when the DND is activated.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
Parameter account.X.ice.ring_mode
It configures the phone to reply 183 (SDP with candidate) during ICE negotiation when there is an
Description
incoming call.
0-The phone does not reply 183 when there is an incoming call.
Permitted
Values
1-The phone replies 183 when there is an incoming call.
Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T33P, T33G, T31P, T31G, T31, T30P, T30
Devices
[1]
[1]
[1]
Configuration Parameters
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
586