Emergency Alarm; Emergency Alarm Configuration - Yealink SIP-T3 Administrator's Manual

Note: The priority of parameter "over_the_air.url.t54w_dd10k" is higher than "over_the_air.url".
Permitted
URL within 512 characters
Values
Default Blank

Emergency Alarm

Emergency alarm can provide safety reliance for people who work in dangerous environment.
W59R handset supports the following four alarm types:
Button: Long press the emergency alarm button for 2 seconds to manually set off the emergency alarm.
l
Man Down: If the handset stays in a tilt angle less than 30 degrees with the ground for some time, an alarm will
l
be triggered.
No-Movement: If the handset stays in a fixed position without movement for a certain period of time, an alarm
l
will be triggered.
Running: The handset detects the running state, and maintains this state for a certain period of time, an alarm
l
will be triggered.
In order to increase the accuracy of the alarm and prevent false alarms, you can also set the corresponding delayed
alarm time. The delayed alarm time is actually the time during which the handset maintains the state, and the alarm
will be triggered when the time is reached.
Topic

Emergency Alarm Configuration

Emergency Alarm Configuration
The following table lists the parameter you can use to configure the emergency alarm.
Parameter alarm.X.name
Description It configures the alarm name.
Permitted
String within 64 characters
Values
Using DECT Handsets with T57W/T54W/T53W/T53/T53C Phones
[1]
<y0000000000xx>.cfg
162