Power Led Indicator - Yealink SIP-T3 Administrator's Manual

It enables or disables the phone to pop up the message when it receives a new voice mail.
If the message disappears, it will not pop up again unless the phone receives a new voice mail or the
Description
user re-registers the account that has unread voice mail(s).
Note: It works only if "account.X.display_mwi.enable" is set to 1 (Enabled).
Permitted
0-Disabled
1-Enabled
Values
Default 1
Web UI Features > Notification Popups > Display Voice Mail Popup
Parameter features.missed_call_popup.enable
It enables or disables the phone to pop up the message when it misses a call.
Description
Note: It works only if "account.X.missed_calllog" is set to 1 (Enabled).
Permitted 0-Disabled
Values 1-Enabled
Default 1
Web UI Features > Notification Popups > Display Missed Call Popup
Parameter features.forward_call_popup.enable
It enables or disables the phone to pop up the message when it forwards an incoming call to another
Description
party.
Permitted 0-Disabled
1-Enabled
Values
Default 1
Web UI
Features > Notification Popups > Display Forward Call Popup
Parameter features.text_message_popup.enable
It enables or disables the phone to pop up the message when it receives a new text message.
Description
Note: It works only if "features.text_message.enable" is set to 1.
Permitted
0-Disabled
1-Enabled
Values
Default 1
Supported
All phones except CP920/CP925/CP935W
Devices
Web UI
Features > Notification Popups > Display Text Message Popup

Power LED Indicator

Power LED indicator indicates power status and phone status. It is not applicable to CP920/CP925/CP935W
phones.
You can configure the power LED indicator behavior in the following scenarios:
The IP phone receives an incoming call
l
The IP phone receives a voice mail or a text message
l
A call is muted
l
A call is placed on hold or is held
l
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
279