Web Access Time Limit Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Permitted
0-Disabled
1-Enabled
Values
Default
1
Web UI Network > Advanced > Web Server > HTTPS
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Web Server > HTTPS Status
CP925/CP935W:
Phone UI
More > Advanced (default password: admin) > Network > Web Server > HTTPS Status
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Web Server > HTTPS
Status
Parameter static.network.port.https
It configures the port used to access the web user interface of the phone over a secure tunnel
Description
(HTTPS).
Permitted
Integer from 1 to 65535
Values
Default 443
Web UI Network > Advanced > Web Server > HTTPS Port (1~65535)
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > Web Server > HTTPS Port
CP925/CP935W:
Phone UI
More > Advanced (default password: admin) > Network > Web Server > HTTPS Port
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > Web Server > HTTPS
Port
Parameter static.wui.default_https_enable
It enables or disables to access the web user interface of the phone over a secure tunnel (HTTPS) by
default.
Description
Note: It works only if "static.wui.https_enable" is set to 1 (Enabled).
0-Disabled
Permitted
Values
1-Enabled
Default 1
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T33P, T33G,
Devices T31P, T31G, T31, T30P, T30, T27G, CP920, CP925, CP935W

Web Access Time Limit Configuration

The following table lists the parameters you can use to configure the web access time limit.
Parameter wui.login_wait_time
It configures the allowable time (in minutes) before logging in to the web user interface.
Description
Example:
86
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg