Group Call Pickup; Group Call Pickup Configuration - Yealink SIP-T3 Administrator's Manual

Group Call Pickup

Group call pickup is used for picking up incoming calls within a predefined group. When any phone within a pre-
defined group of phones receives an incoming call, you can pick up that call easily on the phone.
If you enable group call pickup, the phone screen will display a GPickup soft key when picking up the handset,
pressing the Speakerphone key or pressing the line key. As shown below:
You can pick up the group incoming call using the GPickup soft key.
Tip : You can set a DSS key as a Group Pickup key to pick up a group call. For more information, refer to
Topic

Group Call Pickup Configuration

Group Call Pickup Configuration
The following table lists the parameters you can use to configure the group call pickup.
Parameter features.pickup.group_pickup_enable
Description It enables or disables the user to use GPickup soft key when performing group call pickup feature.
0-Disabled
Permitted
Values
1-Enabled, the phone will display the GPickup soft key on the Dialing screen.
Default
0
Web UI
Features > Pick up & Park > Group Call Pickup
Parameter features.pickup.group_pickup_code
It configures the group call pickup code on a phone basis.
Description
Note: The code configured by "account.X.group_pickup_code" takes precedence over that configured
by this parameter.
Permitted
String within 32 characters
Values
Default Blank
Web UI Features > Pick up & Park > Group Call Pickup Code
Parameter account.X.group_pickup_code
It configures the group pickup code.
Description
Note: The code configured by this parameter takes precedence over that configured by "fea-
tures.pickup.group_pickup_code".
<y0000000000xx>.cfg
<y0000000000xx>.cfg
[1]
<MAC>.cfg
Advanced Features
DSS Keys .
470