Call Settings Parameters - Yealink SIP-T3 Administrator's Manual

Default 0
Parameter sip.mac_in_ua
Description It enables or disables the phone to carry the MAC address information in the User-Agent header.
0-Disabled
1-Enabled, the phone will carry the MAC address with colons (for example 00:15:65:7f:fb:7e) in the
Permitted
User-Agent header.
Values
2-Enabled, the phone will carry the MAC address without colons (for example 0015657ffb7e) in the
User-Agent header.
Default 0
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.

Call Settings Parameters

Parameter phone_setting.show_code403
It configures the display message on the phone screen when receiving a 403 message.
Description
If it is left blank, the phone will display the value sent from the server when receiving the 403 mes-
sage.
Permitted
String within 99 characters
Values
Default Blank
Parameter phone_setting.incoming_call_when_dialing.priority
It enables or disables the phone to interrupt the user's operations in the contact, history, and dialing
Description
screen when there is an incoming call.
0-Disabled, the phone will not switch to the incoming call screen if there is an incoming call arrives
when the phone is in the dialing/transfer/conference/new call screen.
1-Enabled, if there is an incoming call arrives when the phone is in the directory/history screen, the
Permitted
phone will the incoming call screen so that you can directly pick up the call.
Values
2-Enabled, if there is an incoming call arrives when the phone is in the dial-
ing/transfer/conference/new call screen, the phone will switch to the incoming call screen so that you
can directly pick up the call.
Default 1
Parameter phone_setting.end_call_net_disconnect.enable
Description It enables or disables the phone to end the call if the network is unavailable during the call.
0-Disabled
Permitted
Values
1-Enabled, the phone will end the call and go to the Idle screen after 5 seconds.
Default 0
Parameter features.station_name.value
It configures station name to be displayed on the top-left corner of the LCD screen.
Description
Note: The text displayed might be truncated if "features.station_name.scrolling_display" is set to 0 (Dis-
Configuration Parameters
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
596