Call Forward Feature Configuration; Call Forward In Phone Mode Configuration - Yealink SIP-T3 Administrator's Manual

the Forward key on the Idle screen.
0-Disabled. When pressing the Forward key, the phone may activate/deactivate the call forward or
Permitted
enter the Always Forward/Busy Forward/No Answer Forward setting screen.
Values
1-Enabled
Default
0
Parameter features.fwd_diversion_enable
It enables or disables the phone to present the diversion information when an incoming call is for-
Description
warded to the IP phone.
0-Disabled
Permitted
1-Enabled, the server can use the Diversion field with a SIP header to inform the phone of a call's his-
Values
tory.
Default 1
Web UI Features > General Information > Diversion/History-Info
Parameter phone_setting.fwd_and_dnd.suspension_prompt <y0000000000xx>.cfg
It enables or disables the phone to display the floating window prompt on the idle screen after call for-
Description
ward is activated.
Permitted
0-Disabled
1-Enabled
Values
Default 1
Supported
All color screen phones
Devices

Call Forward Feature Configuration

After you choose a call forward mode, you can configure call forward feature for all lines or specific lines. It depends
on the call forward mode:
Phone (default): Call forward feature is effective for all lines.
l
Custom: Call forward feature can be configured for a specific line or multiple lines.
l
Note: Forward mode is set by the parameter "features.fwd_mode".
Yealink phones also support call forward on code and off code to activate and deactivate server-side call forward
feature. They may vary on different servers.
Tip
: You can set a DSS key as a Forward key, and specify a contact you want to forward the incoming calls to for this key.
For more information, refer to
Topics

Call Forward in Phone Mode Configuration

Call Forward in Custom Mode Configuration
Call Forward in Phone Mode Configuration
The following table lists the parameters you can use to configure call forward in phone mode.
Parameter forward.always.enable
It triggers the always forward feature to on or off on a phone basis.
Description
Note: It works only if "features.fwd.allow" is set to 1 (Enabled) and "features.fwd_mode" is set to 0
DSS Keys
.
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Call Features
445