Blf Key Led/Icon And Behavior For Call-Out State Configuration - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
are ringing.
Note: It works only if "blf.enhanced.callin.enable" is set to 1 (Enabled).
Permitted
String
Values
Default Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter blf.enhanced.callin.talking.action
It configures the behavior when pressing the BLF/BLF list DSS key if the monitor is talking and mon-
itored user is ringing.
Description
Note: It works only if "blf.enhanced.callin.enable" is set to 1 (Enabled).
Permitted
String
Values
Default
Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter blf.enhanced.callin.idle.action
It configures the behavior when pressing the BLF/BLF list DSS key if the monitor is idle and monitored
user is ringing.
Description
Note: It works only if "blf.enhanced.callin.enable" is set to 1 (Enabled).
Permitted
String
Values
Default Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices

BLF Key LED/Icon and Behavior for Call-out State Configuration

The following table lists the parameters you can use to configure BLF key LED/icon and Behavior for the call-out
state (the monitored user is calling out).
Parameter blf.enhanced.callout.enable
Description It enables or disables the custom configuration when the monitored user is calling out.
0-Disabled
Permitted
1-Enabled, the phone will display the custom BLF/BLF List DSS key LED status/icon colors and per-
Values
form the custom behavior when pressing the BLF/BLF List DSS key.
Default 0
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter blf.enhanced.callout.led
It configures the custom BLF/BLF List DSS key LED status/icon colors when the monitored user is call-
ing out.
This value uses the same macro action string syntax as an Enhanced DSS key.
Description
Example:
blf.enhanced.callout.led = $LEDg1000o$
495
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg