Yealink phones support three display methods: Label, Display Name, and User Name. You can customize the
account information to be displayed on the IP phone as required.
Topic
Display Method on Dialing Configuration
Display Method on Dialing Configuration
Parameter features.caller_name_type_on_dialing
It configures the selected account information displayed on the pre-dialing or dialing screen.
Description
Note: It works only if "features.station_name.value" is left blank.
1-Label, configured by the parameter "account.X.label".
Permitted
2-Display Name, configured by the parameter "account.X.display_name".
Values
3-User Name, configured by the parameter "account.X.user_name".
Default
3
Web UI
Features > General Information > Display Method on Dialing
Key As Send
Key as send allows you to assign the pound key ("#") or asterisk key ("*") as the send key.
Topic
Key As Send Configuration
Key As Send Configuration
The following table lists the parameters you can use to configure the key as send.
Parameter features.key_as_send
Description It configures the "#" or "*" key as the send key.
0-Disabled, neither "#" nor "*" can be used as the send key.
Permitted
1-# key
Values
2-* key
Default
0
Supported
All phones except CP925/CP935W
Devices
Web UI
Features > General Information > Key As Send
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Phone Customization
265