Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Importing BIN Files from the Phone
Procedure
1. From the web user interface, click Settings > Configuration > BIN Configuration.
2. In the Export or Import Configuration (Import Configuration) block, click Browse to locate a BIN configuration
file from your local system.
3. Click Import to import the configuration file.
Topic
BIN Files Import URL Configuration
BIN Files Import URL Configuration
The following table lists the parameter you can use to configure the BIN files import URL.
Parameter static.configuration.url
It configures the access URL for the custom configuration files.
Description
Note: The file format of the custom configuration file must be *.bin.
Permitted
URL within 511 characters
Values
Default
Blank
T57W/T54W/T53W/T53/T53C/T48U/T46U/T43U/T42U/CP925/CP935W:
Settings > Configuration > BIN Configuration > Import Configuration
Web UI
Other Phones:
Settings > Configuration > BIN Configuration > Import Configuration
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Device Status
Available information on device status includes:
General information (IPv4 address or IPv6 address, phone MAC address, Machine ID, Wi-Fi dongle MAC
l
address, firmware version, and warning).
Network status (IPv4 status or IPv6 status, IP mode, phone MAC address, Wi-Fi dongle MAC address, and VLAN
l
ID).
Phone status (product name, hardware version, firmware version, product ID, phone MAC address, Wi-Fi dongle
l
MAC address, Bluetooth dongle MAC address and device certificate status).
Account status (registration status of SIP accounts).
l
Wi-Fi status
l
Topic
Viewing Device Status
Viewing Device Status
You can view device status via the phone user interface by pressing the OK key or goingto Menu > Status.
You can also view the device status via the web user interface.
Procedure
616
[1]
<y0000000000xx>.cfg