Auto Line Labels Rule Configuration - Yealink SIP-T3 Administrator's Manual

Note: The number of the line keys is determined by "account.X.number_of_linekey". The value con-
figured by this parameter takes precedence over that configured by the parameter "phone_set-
ting.call_appearance.conference_via_new_linekey".
0-Disabled, the phone will place a new call using the current line key when pressing the Conf/Con-
ference soft key.
Permitted
1-Enabled, the phone will place a new call by automatically selecting a new line key (the cor-
Values
responding line key is not seized) when pressing the Conf/Conference soft key. If all line keys are
seized, the current line key will be used.
Default Blank
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42U/T42G/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for CP925/CP935W, X=1.

Auto Line Labels Rule Configuration

When assigning multiple line keys per account, these automatically assigned line keys use its Account Label (set
by "account.X.label") as default label to display on the screen. In order to distinguish these automatically assigned
line keys, you can customize the line key labels one by one or configure the auto line labels rule for these line keys.
The following table lists the parameters you can use to configure the auto line labels rule.
Parameter account.X.auto_label.enable
It enables or disables the Auto Label feature. It is only applicable to the automatically assigned line
DSS keys.
Description
Note: It works only if "features.auto_linekeys.enable" is set to 1 (Enabled).
0-Disabled, the line keys labels are determined by "account.X.label".
Permitted
1-Enabled, the line keys labels are determined by the custom label rule (configure by the parameter
Values
"accout.X.auto_label.rule").
Default 0
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Parameter account.X.auto_label.rule
It configures the Auto Label rule.
You need to know the following basic regular expression syntax:
{L}: The value is configured by the parameter "account.X.label".
{N}: An increasing number from N. For example, abc{1}{5} represents the following labels: abc15,
abc26, abc37, and so on.
Description
Multiple labels are separated by "|". For example, Yea|Yea|Yea|Tom_{2} means to display "Yea" for
first three line keys, and from the fourth one, display label Tom_2, Tom_3, and so on in turn.
Other Characters: for example, ABC, will display ABC the same as what you have configured.
Note: It works only if "features.auto_linekeys.enable" and "account.X.auto_label.enable" are set to 1
(Enabled). The number of valid labels is configured by the parameter "account.X.number_of_linekey".
Permitted
String
Values
[1]
<MAC>.cfg
[1]
<MAC>.cfg
Account Settings
351