Multicast Paging Settings; Multicast Paging Settings Configuration - Yealink SIP-T3 Administrator's Manual

Web UI Directory > Multicast IP > Multicast Listening > Channel
[1]
X ranges from 1 to 31.

Multicast Paging Settings

You can configure some general settings for multicast paging, for example, specify a codec, configure the volume
and audio device for listening to a paging call.
By default, all the listening groups are considered with a certain priority from 1 (lower priority) to 31 (higher priority).
If you neither want to receive some paging calls nor miss urgent paging calls when there is a voice call or paging
call, or when DND is activated, you can use the priority to define how your phone handles different incoming paging
calls.
Paging Barge
You can set your phone whether an incoming paging call interrupts an active call.
The Paging Barge defines the lowest priority of the paging group from which the phone can receive a paging call
when there is a voice call (a normal phone call rather than a multicast paging call) in progress. You can specify a
priority that the incoming paging calls with higher or equal priority are automatically answered, and the lower ones
are ignored.
If it is disabled, all incoming paging calls will be automatically ignored.
Paging Priority
You can set your phone whether a new incoming paging call interrupts a current paging call.
The Paging Priority feature decides how the phone handles incoming paging calls when there is already a paging
call on the phone. If enabled, the phone will ignore incoming paging calls with lower priorities, otherwise, the phone
will answer incoming paging calls automatically and place the previous paging call on hold. If disabled, the phone
will automatically ignore all incoming paging calls.
DND for Ignoring Paging Call
If you do not want to miss some urgent paging calls when DND is activated. You can use the Ignore DND feature to
define the lowest priority of paging group from which the phone can receive an urgent paging call when DND is
activated. You can specify a priority that the incoming paging calls with higher or equal priority are automatically
answered, and the lower ones are ignored.
If it is disabled, all the incoming paging calls will be ignored when DND is activated in phone mode.
Topic

Multicast Paging Settings Configuration

Multicast Paging Settings Configuration
The following table lists the parameters you can use to change multicast paging settings.
Parameter multicast.codec
Description It configures the codec for multicast paging.
Permitted
PCMU, PCMA, G729, G722
Values
Default G722
Supported
All phones except T30P/T30/T19(P) E2
Devices
Web UI Features > General Information > Multicast Codec
<y0000000000xx>.cfg
Call Features
465