Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
transfer to screen.
Default
0
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T53C/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T33P/T33G, X=1-4; for
T40P/T40G/T23P/T23G, X=1-3; for T31P/T31G/T31/T21(P) E2, X=1-2; for T30P/T30/T19(P)
E2/CP920/CP925/CP935W, X=1.
Transfer Mode for Dsskey Configuration
The following table lists the parameter you can use to configure transfer mode for Dsskey.
Parameter transfer.dsskey_deal_type
It configures the transfer mode for the DSS key. When the user presses the DSS Key during a call, the
DSS Key behavior depends on the transfer mode.
Description
Note: This feature is only applicable to the Speed Dial key, BLF/BLF List key or Transfer key with an
assigned value.
0-New Call
1-Attended Transfer
Permitted
2-Blind Transfer
Values
4-Optional, users can choose to transfer the call via New Call, Attended Transfer or Blind Transfer
manually (not applicable to T48G/T46G/T42G/T41P/T29G phones)
Default
2
Supported
All phones except T30P, T30, T19(P) E2 and CP920
Devices
Web UI
Features > Transfer > Transfer Mode via Dsskey
Conference
The Yealink phones support local conference and network conference.
Topics
Conference Type Configuration
Local Conference Configuration
Network Conference Configuration
Conference Type Configuration
You can specify which type of conference to establish.
The following table lists the parameter you can use to set a conference type.
Parameter account.X.conf_type
Description It configures the conference type for a specific account.
0-Local Conference
Permitted
Values
2-Network Conference
Default
0
Web UI
Account > Advanced > Conference Type
458
[1]
<y0000000000xx>.cfg
<MAC>.cfg