Example: Configuring Edk List For A Line Key - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Default 0
Parameter softkey.X.use.conferenced
It enables or disables the custom soft key X to be displayed in the conference state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
0-Disabled
Values 1-Enabled
Default 0
Parameter softkey.X.use.dialtone
It enables or disables the custom soft key X to be displayed in the dial tone (no numbers entered)
state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
0-Disabled
Values 1-Enabled
Default 0
Parameter softkey.X.use.dialing
It enables or disables the custom soft key X to be displayed in the dialing state.
Description
Note: It works only if "features.enhanced_dss_keys.enable" and "softkey.X.enable" are set to 1
(Enabled).
Permitted
0-Disabled
Values 1-Enabled
Default 0
[1]
X is the soft key ID. X=1-10.

Example: Configuring EDK List for a Line Key

The following takes an example to help you understand how to execute the macro action string.
Example
features.enhanced_dss_keys.enable = 1
edk.edklist.1.enable = 1
edk.edklist.1.mname = IVR1
edk.edklist.1.action = 1013$Tinvite$$Cwc$$Cp10$$Penter number&C4&N$$Tdtmf$$Cp3$$Chu$
linekey.1.type = 73
linekey.1.value = !IVR1
linekey.1.label = Custom
After provisioning, the line key 1 will invoke the macro "IVR1". You can press the line key 1 to execute the action
"1013$Tinvite$$Cwc$$Cp10$$Penter number&C4&N$$Tdtmf$$Cp3$$Chu$".
You can also set "linekey.1.value = 1013$Tinvite$$Cwc$$Cp10$$Penter number&C4&N$$Tdtmf$$Cp3$$Chu$"
without configuring an EDK list. You can also manually assign a line key using the macro "IVR1" or action string
"1013$Tinvite$$Cwc$$Cp10$$Penter number&C4&N$$Tdtmf$$Cp3$$Chu$" manually on their phone.
316
[1]
[1]
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg