Label Length Display Configuration - Yealink SIP-T3 Administrator's Manual

Hide thumbs Also See for SIP-T3:
Table of Contents

Advertisement

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
When label length feature is set to Mid Range (not applicable to T57W/T48U/T48S/T48G/T33P/T33G phones):
Topic

Label Length Display Configuration

Label Length Display Configuration
The following table lists the parameters you can use to configure the label length display.
Parameter features.config_dsskey_length
Description It configures the label length displayed on the idle LCD screen for the line key.
0-Default
Permitted
1-Extended
Values
2-Mid-Range (only applicable to T54W/T46U/T46S/T46G/T29G phones)
Default
0
Supported
All color screen phones except CP925/CP935W
Devices
Web UI
Dsskey > Line Key > Label Length
Parameter features.shorten_linekey_label.enable
It enables or disables the phone to display the length of the line key label with 9 digits.
Description
Note: It works only if "features.config_dsskey_length" is set to 0 (Default).
0-Disabled, the line key label can display at most 8 digits.
Permitted
Values
1-Enabled, the line key label can display at least 9 digits.
240
<y0000000000xx>.cfg
<y0000000000xx>.cfg

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sip-t2Sip-t4Sip-t5Sip-cp920

Table of Contents