Yealink SIP-T3 Administrator's Manual page 170

Parameter alarm.X.ring.enable
Description It enables or disables to play the ringtone when the handset initiates the pre-alarm.
0-Disabled
Permitted
Values
1-Enabled
Default 1
Web UI Features > Alarm > Alarm Template (Alarm Template X) > Ring
alarm.X.weekly.begin_time
Parameter
alarm.X.weekly.end_time
It configures the starting/ending time of the day for the handset to perform an alarm detection.
The alarm detection occurs on a random time between the starting time and the ending time.
Description
Note: If the configured starting time is greater than the ending time, such as 23:00-06:00, it means that
the alarm detection is enabled on the day from 00:00-06:00 and 23:00-00:00.
Permitted
Time from 00:00 to 23:59
Values
Default 00:00
Web UI Features > Alarm > Alarm Template (Alarm Template X) > Time
Parameter alarm.X.weekly.dayofweek
Description It configures the days of the week for the handset to perform an alarm detection weekly.
Permitted
0123456 or a combination of these digits
Values
Default 0123456
Web UI Features > Alarm > Alarm Template > Day of Week
Parameter handset.X.alarm.template
It configures the alarm template for the specific account.
Description
Multiple alarm templates are seperated by commas.
Permitted
Random combination of numbers 1 to 10
Values
Default Blank
Parameter handset.X.alarm.number
Description It configures the handset X alarm number.
Permitted
String within 128 characters
Values
Default Blank
Web UI Account > Alarm Assignment > Config to(Handset X)> Alarm Number
Parameter alarm.server.address
Description It configures the address of the alarm server.
Permitted
String within 256 characters
Values
Using DECT Handsets with T57W/T54W/T53W/T53/T53C Phones
[1]
[1]
[1]
[1]
[2]
[2]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
164