Example: Adding Replace Rules Using A Replace Rule File; Dial Plan Defined By Digit Map (New Dial Plan Mechanism) - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
Example:
dialplan.block_out.number.1 = 4321
When you dial the number "4321" on your phone, the dialing will fail and the phone screen will
prompt "Forbidden Number".
Note: It works only if "dialplan.digitmap.enable" and "account.X.dialplan.digitmap.enable" are set to 0
(Disabled).
Permitted
String within 32 characters
Values
Default Blank
Settings > Dial Plan > Block Out > BlockOut NumberX
Web UI
Parameter dialplan.block_out.line_id.X
It configures the desired line to apply the block out rule. The digit 0 stands for all lines. If it is left blank,
the block out rule will apply to all lines on the IP phone.
Description
Note: Multiple line IDs are separated by commas. It works only if "dialplan.digitmap.enable" and
"account.X.dialplan.digitmap.enable" are set to 0 (Disabled).
0 to 16 (for T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G)
0 to 12 (for T53W/T53/T53C/T43U/T42U/T42S/T42G)
0 to 6 (for T41P/T41S/T27G)
Permitted
0 to 4 (for T33P/T33G)
Values
0 to 3 (for T40P/T40G/T23P/T23G)
0 to 2 (for T31P/T31G/T31/T21(P) E2)
0, 1 (for T30P/T30/T19(P) E2/CP920/CP925/CP935W)
Default Blank
Web UI Settings > Dial Plan > Block Out > Account
[1]
X is from 1 to 10.

Example: Adding Replace Rules Using a Replace Rule File

The following example shows the configuration for adding replace rules.
Customize the replace rule template file and place this file to the provisioning server "http://192.168.10.25".
Example
dialplan_replace_rule.url = http://192.168.10.25/DialPlan.xml
After provisioning, the rules defined in this file are added to the IP phone, and you can use the replace rules on the
phone.

Dial Plan Defined by Digit Map (New Dial Plan Mechanism)

Digit maps, described in RFC
any string of a digit map, the call is automatically placed. If a number entered matches no string - an impossible
match - you can specify the phone's behavior. You can specify the digit map timeout, the period of time before the
entered number is dialed out.
398
[2]
3435, are defined by a single string or a list of strings. If a number entered matches
[1]
<y0000000000xx>.cfg