Tr-069 Configuration - Yealink SIP-T3 Administrator's Manual

RPC Method
GetRPCMethods This method is used to discover the set of methods supported by the CPE.
SetParameterValues This method is used to modify the value of one or more CPE parameters.
GetParameterValues This method is used to obtain the value of one or more CPE parameters.
GetParameterNames This method is used to discover the parameters accessible on a particular CPE.
GetParameterAttributes This method is used to read the attributes associated with one or more CPE parameters.
SetParameterAttributes This method is used to modify attributes associated with one or more CPE parameters.
Reboot This method causes the CPE to reboot.
This method is used to cause the CPE to download a specified file from the designated loc-
ation.
File types supported by the phones are:
Download
l
l
This method is used to cause the CPE to upload a specified file to the designated location.
File types supported by the phones are:
Upload
l
l
This method is used to request the CPE to schedule a one-time Inform method call (sep-
ScheduleInform
arate from its periodic Inform method calls) sometime in the future.
FactoryReset This method resets the CPE to its factory default state.
This method informs the ACS of the completion (either successful or unsuccessful) of a file
TransferComplete
transfer initiated by an earlier Download or Upload method call.
AddObject This method is used to add a new instance of an object defined on the CPE.
DeleteObject This method is used to remove a particular instance of an object.

TR-069 Configuration

The following table lists the parameters you can use to configure TR-069.
Parameter static.managementserver.enable
Description It enables or disables the TR-069 feature.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Web UI Settings > TR069 > Enable TR069
Parameter static.managementserver.username
It configures the TR-069 ACS server user name used to authenticate the phone.
Description
Leave it blank if no authentication is required.
Permitted
String within 128 characters
Values
Firmware Image
Configuration File
Configuration File
Log File
Description
<y0000000000xx>.cfg
<y0000000000xx>.cfg
Network Configurations
72