Configuration Parameters; Broadsoft Parameters; Broadsoft Settings - Yealink SIP-T3 Administrator's Manual

Configuration Parameters

This section provides a description and permitted values of some settings.
Topics

BroadSoft Parameters

Alcatel-Lucent Barge in Parameters
Start2Start ACD Parameters
Ethernet Interface MTU Parameters
SIP Settings Parameters
Call Settings Parameters
BroadSoft Parameters
This section shows the parameters you can use to configure the phone with BroadSoft server.
For more information on BSFT, refer to
Yealink IP Phones Deployment Guide for BroadSoft UC-One

BroadSoft Settings

[1]
Parameter bw.enable
Description It enables or disables the BroadSoft features.
Permitted
0-Disabled
1-Enabled
Values
Default 0
Parameter bw.features_status.display_mode
It configures the icon display mode when the corresponding BSFT feature is enabled on the phone.
Description
Note: It works only if "bw.enable" and "bw.xsi.enable" are set to 1 (Enabled).
0-The phone does not display the corresponding icon. (This is the old user experience)
Permitted
1-Enabled, the phone displays the corresponding icon when it requests the server to enable the cor-
Values
responding feature.
Default
0
Supported
All color screen phones
Devices
Check which BSFT features are currently enabled through the icons displayed on the phone.
It is available to the following scenarios:
Always Forward, Busy Forward, No Answer Forward
Case Scen-
l
Anonymous Call Rejection
ario
l
Anonymous Call
l
Simultaneous Ring Personal
l
Remote Office
l
Parameter bw.features.flash_time
It configures the time (in seconds) when the phone actively requests the BSFT server to enable the fea-
ture .
Description
Note: It works only if "bw.enable" and "bw.xsi.enable" are set to 1 (Enabled).
Permitted
Integer from 0 to 86400
Yealink IP Phone Features Integrated with BroadSoft UC-One User Guide
Environment.
Configuration Parameters
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
or
560