Number Assignment; Number Assignment Configuration - Yealink SIP-T3 Administrator's Manual

Status > Handset > Handset Name > Handset X
Web UI
T57W/T54W/T53C:
Menu > DECT Settings > Handsets > Handset X
Phone UI
T53W/T53:
Menu > Settings > DECT Settings > Handsets > Handset X
W78H/W73H/W59R/W53H/W56H:
OK > Settings > Handset Name
DD Phone (Black-and-white Screen)/CP930W:
Handset UI
Menu > Settings > Basic Settings > Phone Name
DD Phone(Color Screen):
Menu > Basic Settings > Phone Name
[1]
X is the handset ID. X=2-5.

Number Assignment

After the handset is registered to the phone, you can assign one or more outgoing lines or incoming lines for the
handset. The phone acts as the Handset 1 (Corded phone).
The handset can only use the assigned outgoing line(s) to place calls. When multiple outgoing lines are assigned
to the handset, the handset uses the first line as the default outgoing line. You can change the default outgoing line
of the handset.
The handset can only receive incoming calls via the assigned incoming line(s). You can assign incoming lines to all
handsets that are registered to the same phone.
Note : You can only assign one outgoing line and one incoming line for the CP930W. And make sure that the outgoing line and
the incoming line are the same line.
Topic

Number Assignment Configuration

Number Assignment Configuration
The following table lists the parameters you can use to assign lines.
Parameter handset.X.incoming_lines
Description It configures the lines to receive incoming calls for a specific handset.
1-Line 1
2-Line 2
3-Line 3
Permitted
Values
4-Line 4
5-Line 5
Multiple line IDs are separated by commas.
The incoming line for Corded phone is line 1-line5.
Default The incoming line for handset 1 is line 1.
The incoming line for handset 2 is line 2.
Using DECT Handsets with T57W/T54W/T53W/T53/T53C Phones
[1]
[1]
[1]
<y0000000000xx>.cfg
[1]
140