Bluetooth - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
1-Enabled (power LED indicator glows yellow)
Default 0
Supported
All phones except CP920/CP925/CP935W
Devices
Web UI Features > Power LED > Talk/Dial Power Light On
Parameter phone_setting.missed_call_power_led_flash.enable
Description It enables or disables the power LED indicator to flash when the phone misses a call.
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator slowly flashes (1s) red)
Permitted
For T19(P) E2 phones:
Values
0-Disabled (power LED indicator does not flash)
1-Enabled (power LED indicator slowly flashes (1s) yellow)
Default 1
Supported
All phones except CP920/CP925/CP935W
Devices
Web UI Features > Power LED > MissCall Power Light Flash
Parameter phone_setting.autop_led_flash_enable
Description It enables or disables the power LED indicator to flash when the phone performs an auto provisioning.
0-Disabled, auto provisioning does not change the LED status (that is, the original LED status will be
Permitted
kept).
Values
1-Enabled, during auto provisioning, the power LED indicator flashes at a fixed frequency.
Default 1
Supported
T57W, T54W, T53W, T53, T53C, T48U, T46U, T43U, T42U, T48S, T46S, T42S, T41S, T33P, T33G,
Devices T31P, T31G, T31, T30P, T30, T27G

Bluetooth

You can pair and connect a Bluetooth headset or Bluetooth-enabled mobile phone with the IP phone. After con-
necting the Bluetooth-enabled mobile phone, you can synchronize the mobile contacts to the IP phone. It is only
applicable to
T57W/T54W/T53W/T53/T53C/T48U/T48S/T48G/T46U/T46S/T46G/T43U/T42U/T42S/T41S/T29G/T27G/CP920/CP9-
25/CP935W phones. For T57W/T54W/T53W/T53/T53C/T48U/T46U/T43U/T42U phones, they can also make and
receive mobile calls on the IP phone. For CP920/CP925/CP935W phones, you can also use your IP phone as a
Bluetooth speaker for your mobile phone and PC. You can set up a conference among the calls on your IP phone,
the PSTN and connected mobile phone ( PSTN is not applicable to CP935W phones ).
Note
: To use Bluetooth feature on T53/T53C/T48U/T48S/T48G/T46U/T46S/T46G/T43U/T42U/T42S/T41S/T29G/T27G
phones, make sure the Bluetooth USB dongle is properly connected to the USB port on the back of the phones. The Bluetooth
dongle should be purchased separately.
Topic
Bluetooth Configuration
282
<y0000000000xx>.cfg
<y0000000000xx>.cfg