Google Contacts; Google Contacts Configuration - Yealink SIP-T3 Administrator's Manual

Note: It works only if "local_contact.favorite.enable" is set to 1 (Enabled). To assign Ext key, make
sure the expansion module has been connected to the phone in advance.
0 - linekey > exp1 key > ... > expN key
1 - exp1 key > ... > expN key > linekey
Permitted
2 - linekey page1 > page1 from exp1 to expN > page2 from exp1 to expN > ... > linekey from page2 to
Values
page3
3-page1 from exp1 to expN > page2 from exp1 to expN > ... > linekey
Note: N is the number of your connected expansion modules.
Default 0
Supported
T57W, T54W, T53W, T53, T53C, T48U, T48S, T48G, T46U, T46S, T46G, T43U, T29G, T27G
Devices

Google Contacts

Google contact is a phone book that is stored on the Google Contact Server. You can sign in to the Google Contact
Server on your phone, and then the phone can establish a connection with the Google Contact Server and down-
load the phone book. As a result, Google contacts appear in the phone directory.
It is not applicable to T48G/T46G/T42G/T41P/T29G phones.
Topics

Google Contacts Configuration

Signing in to the Google Contact Server
Google Contacts Configuration
The following table lists the parameter that the phone can use to connect to the Google Contact Server.
Parameter google_contact_server.enable
Description It enables or disables the phone to connect to the Google Contact Server.
0-Disabled
Permitted
Values
1-Enabled
Default 0
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
T57W/T54W/T53W/T53/T53C/T48U/T46U/T43U/T42U/CP925/CP935W:
Directory > Google Contacts > Google Contacts
Web UI
Other Phones:
Directory > Google Contacts > Google Contact Server
Parameter google_contact_server.display_mode
It configures the display mode of the Google contacts.
Description
Note: It works only if "google_contact_server.enable" is set to 1 (Enabled).
Permitted
0-All downloaded Google contacts will be displayed on the phone.
Values
Directory
<y0000000000xx>.cfg
<y0000000000xx>.cfg
364