Directory Search Settings Configuration; Number Matching Settings - Yealink SIP-T3 Administrator's Manual

Administrator's Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones

Directory Search Settings Configuration

The following table lists the parameters you can use to configure directory search settings.
Parameter directory.search_type
It configures the search type when searching the contact in Local Directory, Remote Phone Book, Net-
Description
work Directory or Blocklist.
0-Approximate string matching, the phone will search the contact numbers or names contain the
entered character(s).
Permitted
Values
1-Prefix matching, the phone will search the contact numbers or names start with the entered char-
acter(s).
Default 0
Parameter phone_setting.search.highlight_keywords.enable
Description It enables or disables the phone to highlight the matched characters in the search results.
Permitted 0-Disabled
1-Enabled
Values
Default 0
Supported
All color screen phones
Devices
Parameter phone_setting.search_t9.enable
It enables or disables the phone to perform an intelligent search when searching for contacts in the dir-
Description
ectory.
0-Disabled, the phone only displays the search results of a number match.
Permitted
Values
1-Enabled
Default 1
Supported
All phones except T48G, T46G, T42G, T41P and T29G
Devices
Parameter directory.containing_search.additional_sorting_mode
It configures the sorting mode in the search results.
Description
Note: It works only if "directory.search_type" is set to 0 (Approximate string matching).
0-Sort by ASCII code order.
Permitted
1-The contacts starting with the searched content are displayed first, and the remaining contacts are
Values
displayed in the ASCII code order.
Default 0
[1]
If you change this parameter, the phone will reboot to make the change take effect.

Number Matching Settings

You can configure the pattern to match the contact numbers/blocklist numbers with the caller's phone number/SMS
contact number.
Topics
Number Matching Settings Configuration
Example: Matching Contacts / Blocklist with the Caller's Phone Number Using the Regular Expression
381
[1]
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg
<y0000000000xx>.cfg