Garmin G1000 Nxi System Maintenance Manual page 93

•
"Upload Complete.............COMPLETE" in the summary box.
Press the ENT key to acknowledge the "Upload Complete" box.
Open PFD1 circuit breaker and remove SVS enablement card.
Enhanced AFCS (ESP) Enablement
Follow this procedure to enable the Electronic Stability and Protection (ESP) feature.
Ensure that the King Air 200/B300 Series GFC700 - ESP Installation (No
AoA) or King Air 200/B300 Series GFC700 - ESP Installation (with AoA)
Configuration file has been loaded.
Insert the Enhanced AFCS Enablement card in the top slot of PFD1, power on PFD1 in
configuration mode.
On PFD1, select the "System Upload" page using the small FMS knob.
Push in the FMS knob to activate the curser in the Group field. Rotate the small FMS
knob to highlight "Enhanced AFCS" and press the ENT key to select it.
In the ITEM window, rotate the small FMS knob to highlight "Enable Enhanced AFCS"
and press the ENT key to select it.
Press the Load softkey.
Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration column for each item loaded.
•
"Upload Complete.............COMPLETE" in the summary box.
Press the ENT key to acknowledge the "Upload Complete" box.
Open PFD1 circuit breaker and remove Enhanced AFCS enablement card.
Search and Rescue Enablement
Follow this procedure to enable the Search and Rescue (SAR) feature.
Insert the SAR Enablement card in the top slot of PFD1, power on PFD1 in configuration
mode.
On PFD1, select the "System Upload" page using the small FMS knob.
Push in the FMS knob to activate the curser in the Group field. Rotate the small FMS
knob to highlight "Enhanced SAR" and press the ENT key to select it.
In the ITEM window, rotate the small FMS knob to highlight "Enhanced Search and
Rescue" and press the ENT key to select it.
Press the Load softkey.
Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration column for each item loaded.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
NOTE
Page 80
Revision 1