Garmin G1000 Nxi System Maintenance Manual page 117

Item
GFC700 Periodic
Check
TAWS Functional
Check
GDU 1050A PFD
(Qty 2)
GDU 1550 MFD
GMA 1347D (Qty 2)
GIA 63W IAU (Qty 2)
GEA 71 EAU (Qty 2)
GTX 335R, GTX
345R, GTX 33( ), or
GTX 3000
Transponder (Qty 2)
GDC 7400 Air Data
Computer (Qty 2)
RVSM checks
GSU 75B ADAHRS
(Qty 2)
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Description/Procedure
Verify proper operation of the GFC700 by
performing the following:
Pre-Flight Test
AFCS Switch Checks
Autopilot Clutch Overpower Check
Autopilot Operation Checks
Periodic TAWS function check
Removal & Replacement
Removal & Replacement
GMA 1347D Test
Landing Gear Aural Alert Check
SiriusXM Audio Suppression Check
Removal & Replacement
Removal & Replacement
Special Inspection - Perform GTX 335R,
GTX 345R, GTX 33( ), or GTX 3000 test.
Removal & Replacement
Special Inspection – Perform Air Data Test.
Special inspection – Perform RVSM Checks
Perform RVSM checks when:
•
a static port is removed/installed
•
the RVSM critical region is repaired
or painted
Removal & Replacement
Magnetic variation database update.
Special Inspection – Perform Air Data Test.
Remove nose compartment pitot/static line
caps at T-fittings located forward of GSU
75B units and check for moisture. Refer to
Garmin drawing 005-00629-44 for line cap
part numbers if replacements are needed
and for torque information.
Manual
Interval
Section No.
9.11.1,
9.11.2,
Phase 2 and 4
9.11.3,
9.11.5
8.3 Phase 4
6.1 On Condition
6.2 On Condition
7.2.3 Phase 2 and 4
7.2.4 Phase 2 and 4
7.2.5 Phase 2 and 4
6.3
On Condition
6.4
6.5 On Condition
7.5.4 24 Calendar Months
6.7 On Condition
7.7.3 24 Calendar Months
8.12 24 Calendar Months
8.12 On Condition
6.9 On Condition
4.6 On Condition
7.7.3 24 Calendar Months
N/A 24 Calendar Months
Page 104
Revision 1