Troubleshooting; Figure 5-1, Aux - System Status Page - Garmin G1000 Nxi System Maintenance Manual

5. TROUBLESHOOTING

This section provides instructions and guidance for G1000 system troubleshooting as installed
in the King Air 300 Series.
Sections 6, 7 and 9 provide detailed instructions on equipment removal,
replacement, configuration, and return-to-service testing. Anytime a G1000
component or LRU is removed, swapped, or replaced, the technician must
follow the procedures given in Sections 6, 7 and 9 to ensure proper operation
of the system.
Troubleshoot the G1000 system by first identifying, then isolating the specific failure to the
responsible LRU. There are several indications that the G1000 presents to the pilot or
technician, showing overall system condition. A course of action should be determined based
on the information presented on the display. This section shows possible scenarios likely to be
encountered during normal operation and gives troubleshooting guidance to the technician to
resolve problems.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
IMPORTANT!
Figure 5-1, Aux – System Status Page
Page 138
Revision 1