Gsr 56 - Garmin G1000 Nxi System Maintenance Manual

Activation of Garmin Connext
In order to activate the optional GSR 56 for Garmin Connext, contact Garmin Product Support
at one of the following numbers (M-F, 7:00 a.m. to 7:00 p.m. Central Standard Time, - Central
USA):
•
1.866.739.5687 (toll free in USA)
•
+1.913.440.1135 (worldwide)
•
Have the following information ready prior to calling:
o Aircraft tail number, serial number, manufacturer, and model
o GSR 56 serial number
o G1000 system ID number
o Name of aircraft owner and contact information
o Credit card information
Garmin Product Support will provide additional information for activation of data services.
To obtain the G1000 system ID number and unit serial numbers, accomplish the following:
1. Turn the large FMS knob on the MFD to select the AUX page group.
2. Turn the small FMS knob to select the SYSTEM STATUS page. Record the SYSTEM ID
number shown in the AIRFRAME field. This number is unique for each G1000 system.
3. Press the LRU softkey to activate the cursor in the LRU INFO field. Use the large FMS
knob to scroll the cursor to GSR1 (if GSR 56 is installed). Record the GSR 56 serial
number shown in the LRU INFO field.
GSR 56 Functional Check
1. Power up the aircraft.
2. Using the large FMS knob, select the AUX page group on the MFD. Using the small
FMS knob, select the AUX-TELEPHONE page.
3. Ensure the system is showing Iridium signal strength (best if aircraft is outside).
4. Press TEL button on the pilot's GMA.
5. Press the DIAL softkey on the MFD.
6. Enter the test phone number in the ENTER PHONE NUMBER field using the GCU
keypad.
7. Press the ENT key on the GCU keypad to accept the phone number.
8. Press the ENT key on the GCU keypad to initiate the dialing sequence.
9. When call is complete, press the HANGUP softkey on the AUX – TELEPHONE page on
the MFD to end the call.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Page 338
Revision 1