Garmin G1000 Nxi System Maintenance Manual page 336

12. Press the key to display the FPL – Direct To page.
13. Use the keypad to type KIXD and verify KIXD is displayed on the MFD.
14. Press the SPC key to add a space and then the BACK key to delete the space.
15. Press the CLR key to clear the field.
16. Type K34 and then press the ENTER key twice. Verify that the flight path to K34 is
displayed on the map.
17. Press the FPL key to open the FPL – Active Flight Plan page. Press the FPL key
again to close it.
18. Press the PROC key to open the Procedures page. Press the PROC key again to close
it.
19. Press the MENU key to open the Menu page. Press the MENU key again to close it.
20. Press the COM key until 1 is lit. Verify the tuning box is present around the COM 1
frequency on PFD1.
21. Using GCU477 keypad, enter in a frequency of 123.450. Verify COM1 frequency
changes as entered.
22. Press the COM key until 2 is lit. Verify the tuning box is present around the COM 2
frequency on PFD1.
23. Using GCU477 keypad, enter in a frequency of 123.450. Verify COM2 frequency
changes as entered.
24. Press the NAV key until 1 is lit. Verify the tuning box is present around the NAV 1
frequency on PFD1.
25. Using GCU477 keypad, enter in a frequency of 108.00. Verify NAV1 frequency changes
as entered.
26. Press the NAV key until 2 is lit. Verify the tuning box is present around the NAV 2
frequency on PFD1.
27. Using GCU477 keypad, enter in a frequency of 108.00. Verify NAV1 frequency changes
as entered.
28. Press the XPDR key. Verify a flashing box appears in the XPDR 1 code window.
29. Using GCU477 keypad, enter in a code of 1234. Verify XPDR1 shows a code of 1234 in
the window.
30. If no other service is to be performed, continue to the return-to-service checks in Section
9.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Page 323
Revision 1