Garmin G1000 Nxi System Maintenance Manual page 109

• The V1 value is the start or lower limit of the color bar range and the V2
value is the upper limit.
• When the RAD (radial) TYPE is selected, the V1 and V2 values will be
the same. The installer can only set the V1 value, the V2 value will be
grayed out and unchangeable.
• When the FULL TYPE and BAR (barber pole) CLR is selected, V2 will
automatically default to MAX and is unchangeable.
• For unused rows, the TYPE should be set to OFF, the CLR should be set
to BLU, and V1 and V2 values should be set to "000".
g. Continue in sequence through all rows to enter the color bands needed and
select EXIT when done.
17. In the CONFIGURE AIRCRAFT menu, select VNE TABLE.
18. Enter the table information below.
19. Select EXIT when done entering the table.
20. Select EXIT in the CONFIGURE AIRCRAFT menu.
21. In the CONFIGURE MENU, select CONFIGURE BARO SYNC.
22. Select OFF.
23. In the CONFIGURE MENU, select CONFIGURE DIMMING.
24. Select DIMMING CONTROL.
25. Select EXT 28V.
26. In the CONFIGURE DIMMING menu, select DIMMING CURVE.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
NOTES
300
# ALT(FT) KTS
1 00000 259
2 21000 259
3 25000 239
4 30000 214
5 35000 191
6 UNUSED 000
7 UNUSED 000
B300
ALT(FT) KTS
00000 263
21000 263
25000 242
30000 217
35000 194
UNUSED 000
UNUSED 000
Page 96
Revision 1