Garmin G1000 Nxi System Maintenance Manual page 353

7. Press the CHK All softkey.
8. Press the Load softkey.
9. Monitor load progress. Verify software load completes without errors as indicated by the
following:
•
Green "PASS" in the Configuration and Software columns for each item loaded.
•
"Upload Complete.............COMPLETE" in the summary box.
10. Press ENT key on PFD1 to acknowledge upload complete.
11. Deactivate cursor.
12. Scroll to the Configuration Manager page.
13. Press the CNFM CFG softkey.
14. Select ok when prompted to "Confirm configuration as expected configuration"
15. Power cycle the system verify there are no red-Xs or system alerts.
16. If red-Xs or system alerts are present, troubleshoot as necessary using Section 5.
G1000 NXi System Maintenance Manual
King Air 300 Series
190-00716-N1
Page 340
Revision 1